DIY Double Hanging Closet

By Rogue Engineer

SKILL
easy

This double hanging closet unit is the perfect height for hanging two rows of clothing. Two rows of shirts or shirts and a row of pants fit nicely in this unit. The unit is 23" deep which gives that elegant, custom look. This unit is meant to be installed beside another similar closet unit or wall.

Download Plans

Tools

  • 18V ONE+ HP Brushless 7-1/4" Circular saw
  • 18V ONE+ HP Brushless Air Strike 18 GA Brad Nailer
  • 18V ONE+ HP Brushless 1/2" Drill/Driver

Accessories

  • 65 PC. DRILL AND IMPACT DRIVE SET

Materials

  • (2) 28-1/2" Closet Rod
  • (2) 3/4"x4'x8' MDF
  • 1-1/2" Trim Screws
  • 3" Wood Screws
  • Wood Filler
  • Wood Glue
Download Plans

Steps

STEP 1

Cut pieces of MDF using the cut guide. Pre-drill and assemble using 1-1/2" Trim Screws.

Tools

Circular Saw, Drill/Driver

STEP 2

Locate the wall studs using a stud finder. Then, using a level, make sure the front and sides of the unit are plumb and secure to the unit in the wall using 3" screws.