Steps
Step 1
Cut out all material using the Lumber & Cut Layout Guide.
Tools
Miter Saw, Tape Measure
Materials
1" x 6" x 8' Wood Board
Step 2
Align the edge of the bottom board to the back board. Glue and nail together.
Tools
Brad Nailer
Materials
Wood Glue, 1-1/2" x 18-Gauge Collated Nails
Step 3
Take (1) side piece and align it to the side of the back and bottom boards. Glue and nail together.
Tools
Brad Nailer
Materials
Wood Glue, 1-1/2" x 18-Gauge Collated Nails
Step 4
Repeat Step 3 and attach the opposite side piece. Glue and nail together.
Tools
Brad Nailer
Materials
Wood Glue, 1-1/2" x 18-Gauge Collated Nails
Step 5
Align the front piece to the assembly. Glue and nail together.
Tools
Brad Nailer
Materials
Wood Glue, 1-1/2" x 18-Gauge Collated Nails
Step 6
Fill nail holes and sand. Seal or paint as desired.
Tools
Sander, Sand Paper
Materials
Paint
Step 7
Install numbers to the center of the back board.
Tools
Drill
Materials
4" House Numbers
