How to Setup, Use, & Maintain the RYOBI 18V ONE+ SWIFTClean Spot Cleaner

By RYOBI Nation

SKILL
easy

Learn how to safely and properly setup and operate your 18V ONE+ SWIFTClean Spot Cleaner with this step-by-step tutorial!

Tools

  • 18V ONE+ SWIFTClean Spot Cleaner
  • 18V ONE+ SWIFTClean Spot Cleaner

Steps

STEP 1

To get started, remove the solution tank and unscrew the top. Fill with solution, screw the top on, and attach to the tool.

filling solution tank

STEP 2

Click the battery into the tool.

attaching the battery

STEP 3

Press the power button to use on a fresh spill. This will activate the powerful suction on the tool. Pull the tool back over the stain.

turning on the tool

STEP 4

Spray Oxy Solution over the stain and turn on the Power Brush Roll for a deep clean.

spraying oxy solution

STEP 6

If the stain has dried down, spray Oxy Solution to completely cover the stain.

spraying oxy solution

Cleaning your SWIFTClean Spot Cleaner: STEP 1

Be sure to remove the battery from the tool before cleaning. Remove the solution tank, dirty tank, and intake nozzle to hand wash or on the top of the dishwasher.

cleaning swift clean

Cleaning your SWIFTClean Spot Cleaner: STEP 2

Remove the Roller Bar using a coin or slotted screwdriver. The scissor groove on the Roller Bar allows hair to be removed with ease without damaging the bar.

removing roller bar

Cleaning your SWIFTClean Spot Cleaner: STEP 3

Rinse the Roller Bar as needed. Remove the foam filter and rinse to clean.

cleaning roller bar and filter

Do's and Don'ts: #1

Do: Keep the tool in a horizontal position. Don't: Use the tool in an upright position.

tool in horizontal

Do's and Don'ts: #2

Do: Empty the dirty tank when it reaches the max liquid level

empty dirty tank

Do's and Don'ts: #3

Do: Remove the battery when storing or cleaning your tool.

removing the battery